© 2014 SATEL NORGE AS HØYDAVEIEN 17 1523 MOSS Telefon: 69 27 70 40 Fax: 69 27 70 41 E-post: produktinfo@satel.no
SATEL-LP Serien for I/O overføring
The new SATEL-LP product family offers an extremely easy solution for simple I/O and serial communications. With software-free radio setup, SATEL-LP offers a cost- effective wireless solution where it is too costly or not possible to run a wire. All SATEL-LP modules are DIN rail mountable. The communications over the air interface is secured with a 128-bit AES encryption and authentication. The system consists of data transfer and expansion modules. The data transceiver modules are used for serial data transfer and expansion modules for I/O signals. I/O signals can also be connected directly to Modbus protocol devices with transceiver modules through RS-232 and RS-485 interfaces. With SATEL-LP system it is easy and simple to create point-to-point, point-to-multipoint or large mesh networks up to 250 nodes. The comissioning can be done without any programming via the thumb wheel – a wireless connection is established automatically. Through AES encryption, frequency hopping spread spectrum, and coexistence management the system reliability is extremely high and data transfer is secured 24/7.
SATEL LP2400
SATEL-LP24 2.4002...2.4785 GHz 100 mW T-BUS ( for extension units ) RS-232, RS-485SATEL LP900
SATEL-LP9 902...928 MHz 1000 mW T- BUS ( for extension units ) RS-232, RS-485SATEL LP868
SATEL-LP8 869.4...869.65 MHz 500 mW T-BUS ( for extension units ), RS-232, RS-485Konfigurasjonsstikk
Configuration sticks for saving data, creating unique network IDs and changing RF bandAntenne for SATEL-LP
Programeringskabel
SATEL NORGE AS LEVERER
KVALITETSPRODUKTER FRA
KJENTE PRODUSENTER
INNEN TRÅDLØSE OG
INDUSTRIELLE NETTVERKS
PRODUKTER
Mer info
Mer info
Mer info
Mer info
